SCART PLUG TO 2 SCART SOCKETS SWITCH BOX
| Scart plug to 2 scart sockets with a parallel push button selection switch mounted in a black plastic box. Simply select between inputs by pushing the button. 0.6m cable.
Price: £8.50 £9.99 Including VAT at 17.5% |
| |
|
SCART PLUG TO 3 SCART SOCKETS SWITCH BOX
| Scart plug to 3 scart sockets with 3 push button selection switches mounted in a black plastic box. Simply select between inputs by pushing the relevant buttons. 0.6m cable.
Price: £10.17 £11.95 Including VAT at 17.5% |
| |
|
SELECT AUTOMATIC SCART CONTROLLER
| The Select TASC-2 totally automatic signal controller interconnects and electronically switches between any 2 SCART equipped devices connected to a TV or satellite receiver. It senses the play or operating mode of a particular device and routes it to the TV or satellite receiver. Compatible equipment includes TVs, Videos, DVD players, Camcorders, Satellite receivers, Satellite decoders etc.
NEW
Price: £25.52 £29.99 Including VAT at 17.5% |
| |
|
2083E REMOTE VIDEO SOURCE SELECTOR
| The 2083E Video Source Selector serves as a switch box that connects multiple audio/video components to your television. It allows you to quickly and easily select which audio/video source you wish to use, without disconnecting and reconnecting your components. Permits input and selection of 4 A/V units into one A/V input on TV. A built-in amplifier compensates for transmission loss with sufficient bandwith even for high definition TV. Switch between sources such as VCR, DVD, satellite receiver, video games, etc. using the front panel buttons or the provided infrared remote control.
Full remote control operation • 2 scart inputs and 2 RCA A/V inputs • 1 Scart output • S-VHS and RGB compatible • LED channel indicators • A 5ft scart cable is included.
NEW
Price: £32.33 £37.99 Including VAT at 17.5% |
| |
|
PHILEX AV AUTO SELECTOR
| Totally automatic signal controller that connects up to 4 Scart equipped devices - senses the play or operating mode of a particular device. TV/monitor Scart can be used as signal input and output. Additional Phono type outputs for connecting to additional TV, display or Hi-Fi system. AV link switch allows viewing of programmes whilst recording from satellite or camcorder - indicator LEDs indicate recording mode. Ideal for: Digital TV, DVD players/recorders, Digital Satellite, Analogue Satellite, Home Cinema, VCR, Camcorders, etc. Power supply included.
NEW
Price: £21.28 £25.00 Including VAT at 17.5% |
| |
|
2-WAY SCART SPLITTER BOX
| Scart plug to 2-way scart socket adapter box (21 pins connected). Provides multiple scart outputs from a single scart connection. 0.6m lead.
Price: £5.53 £6.50 Including VAT at 17.5% |
| |
|
3-WAY SCART SPLITTER BOX
| Scart plug to 3-way scart socket adapter box (21 pins connected). Provides multiple scart outputs from a single scart connection. 0.6m lead.
Price: £6.38 £7.50 Including VAT at 17.5% |
| |
|
5-WAY SCART SPLITTER BOX
| Scart plug to 5-way scart socket adapter box (21 pins connected). Provides multiple scart outputs from a single scart connection. 0.6m lead.
Price: £10.87 £12.77 Including VAT at 17.5% |
| |
|
SCART TO COAX RF TV MODULATOR
| Converts audio/video signals from a DVD player, Video Game, or most other sources into an RF signal for TV aerial connections. The perfect solution for televisions without SCART inputs.
Scart socket • RF In/Out (Loop through) • Output channel 36. PAL B,G/I (switchable) • Power supply 230V AC 50Hz • Dimensions (WxHxD): 163x115x45mm • Weight 210g
Price: £16.16 £18.99 Including VAT at 17.5% |
| |
|
ILS102 TV MODULATOR
| TV modulator allows the connection of SCART or phono video signals to the RF coaxial input of a TV or video. Ideal for CCTV, DVD and games consoles.
Seven segment LED channel display. Mains adaptor and coaxial flylead (plug-socket) are supplied. SCART out loop through for connection to VCR.
Input Connectors: SCART, RCA and Coaxial • Output Connectors: SCART and Coaxial • Output channels: 21-69 (switchable) • Power supply: 9Vdc 200mA via mains adaptor (included) • Dimensions (WxHxD): 122 x 31 x 83mm • Weight 148g
Price: £17.83 £20.95 Including VAT at 17.5% |
| |
|
HDMI MANUAL SWITCHING BOX 2 INPUTS : 1 OUTPUT
| Switch between two HDMI devices and display on a single screen.
Supports all HDTV formats including 720p, 1080i and 1080p • HDMI and HDCP compliant • Corrosion resistant gold plated contacts for optimum data transmission • Push button input selection • No power supply required • 2 x HDMI 19-pin female inputs with 1 x HDMI female output • Low profile plastic case in a black finish • 180 x 33 x 127mm.
Price: £12.30 £14.45 Including VAT at 17.5% |
| |
|
HDMI MANUAL SWITCHING BOX 4 INPUTS : 1 OUTPUT
| Switch between four HDMI devices and display on a single screen.
Supports all HDTV formats including 720p, 1080i and 1080p • HDMI and HDCP compliant • Corrosion resistant gold plated contacts for optimum data transmission • Push button input selection • No power supply required • 4 x HDMI 19-pin female inputs with 1 x HDMI female output • Low profile plastic case in a black finish • 180 x 33 x 127mm.
Price: £18.68 £21.95 Including VAT at 17.5% |
| |
|
HDMI SWITCH BOX WITH REMOTE CONTROL
2 INPUTS : 1 OUTPUT
| A compact, attractively designed switcher with 2 inputs and 1 output which is easy to install and allows remote selection between two HDMI devices.
Amplifier and EQ function allow longer cable runs • HDCP compliant • Fully supports 1080p HDTV • Gold HDMI sockets for optimum signal transfer • Supplied with IR remote control and mains adaptor • Manual or remote control selection of input channel • Power supply 5Vdc, 1A • Battery : Remote CR2025 (Lithium) • Connector Type A 19-pin female • HDMI Version 1.3 Compliant • Pixel frequency range 25MHz - 165MHz • Dimensions 180 x 32 x 80mm.
Price: £39.49 £46.40 Including VAT at 17.5% |
| |
|
HDMI SWITCH BOX WITH REMOTE CONTROL
4 INPUTS : 1 OUTPUT
| A compact HDMI switcher with 4 inputs and 1 output which is easy to install allowing remote selection between any four HDMI sources.
Compliant with HDMI 1.2a standard • Fully supports 1080p HDTV • Supports HDCP compliant devices • Maintains highest HDMI single link video resolution and highest HDMI digital audio signal • Gold plated HDMI sockets for optimum signal transfer • Supplied with switchmode power supply and IR remote control • Manual or remote control selection of input channel with LED indicators • Built-in pre-amplifier and equalizer • Power supply 5Vdc, 1A • Pixel frequency range 25MHz - 165MHz • Remote control 3V, CR2025 • Video resolution 480p, 720p, 1080i, 1080p • Dimensions 180 x 32 x 78mm.
Price: £57.40 £67.45 Including VAT at 17.5% |
| |
|
BT31 3-WAY STEREO INPUT CONTROL
| Enables 3 inputs to be used with one socket.
Connects 3 stereo devices (CD, DAT, Tuner, Cassette Deck etc) to one input socket on amplifier • Gold plated phono (RCA) connectors • Strong, stylish metal console.
Price: £11.06 £13.00 Including VAT at 17.5% |
| |
|
BT26 PHONO/MICROPHONE PRE-AMPLIFIER
| A low noise high gain pre-amp for use with Magnetic Cartridges or Dynamic or Condenser microphones. Use on any amplifier with a "phono" input.
IC technology for high gain and low noise • CE certified • Suitable for stereo microphones or up to 2 mono microphones • Strong, stylish steel case • Power supply included.
Price: £21.27 £24.99 Including VAT at 17.5% |
| |
|
BT926 HIGH GRADE PHONO PRE-AMP
| A dedicated, high fidelity pre-amplifier. Designed to match RIAA specifications. With many current amplifiers lacking a "phono" stage, this is the ideal accessory to connect a Hi-Fi turntable to any amplifier.
Gold plated input sockets • CE certified • High specification IC circuit designed to meet RIAA requirements • Double screened output lead with gold plated connectors • Strong, sylish steel case • External power supply included.
Price: £27.23 £32.00 Including VAT at 17.5% |
| |
|
HEADPHONE AMPLIFIER
| B-tech BT928TV television headphone amp, connects to your TVs Scart or RCA sockets which means that the TV's speakers will not be muted when it's in use. This is an aid for the hard of hearing who can listen at their preferred volume level without disturbing others. It features sockets for both standard and miniature headphone jacks and both sockets can be used at the same time if necessary. The in and out RCA sockets enable the unit to be daisy chained anywhere in the input circuit. Also suitable for CD players, etc. that do not have a built in amplifier, only phono outputs.
Price: £34.08 £40.04 Including VAT at 17.5% |
| |
|
3-CHANNEL HEADPHONE AMPLIFIER
| A compact, desk top unit allowing upto three pairs of stereo headphones to be used at the same time.
Master volume control.
Headphone output 1 either 6.35mm or 3.5mm.
Headphone outputs 2 & 3 are 6.35mm.
3m Integral lead with RCA phono plugs for connection to audio source.
RCA to 3.5mm stereo adaptor included for connection to a portable stereo music source or computer.
DC input socket with red LED power indicator.
Power supply 6Vdc, 500mA via AC/DC adaptor ( NOT included ).
Max. output 200mW / channel, 32ohms @ 1kHz • Frequency response 20Hz - 20kHz • S/N ratio >65dB • Dimensions 127 x 63 x 46mm • Weight 219g
Price: £18.68 £21.95 Including VAT at 17.5% |
| |
|
HEADAMP - FOUR OUTPUT HEADPHONE AMP
| A high quality 4 output headphone amplifier that can be connected directly to a CD player, tuner, TV, tape recorder or any other line-level mono or stereo audio source, or even to a headphone socket on an amplifier etc. HeadAMP provides amplification and individual volume control for up to 4 headsets.
Signal To Noise Ratio >90dB • IMD (SMPTE) 0.01% • Maximum Input Level +14dBV • Maximum Output Level 20dB per channel • Output Impedance 51 Ohms per channel • Output Connectors Four stereo 1/4" headphone outputs • Power Requirements 12V DC ( Mains adapter included) • Total Harmonic Distortion <0.01% • Dimensions 150mm x 75mm x 38mm • Weight 590g
Price: £63.00 £74.03 Including VAT at 17.5% |
| |
|
3-WAY OPTICAL SELECTOR SWITCH
A three way rotary selector switch, with clear selection indicator, that expands inputs/outputs for optical audio equipment. Suitable for either 3.5mm optical or TOS-link connectors with the supplied adaptors. The unit has a positive locking mechanism to ensure high integrity connections and optimum light signal transfer. Ideal for connecting 3 pieces of digital audio equipment to one optical input on an amplifier.
Price: £27.19 £31.95 Including VAT at 17.5%
|
| |
|
BT992 UNIVERSAL DIGITAL SIGNAL CONVERTOR
| The BT992 is a 2 way signal convertor, designed to convert digital signals between Optical and Co-axial formats.
If you need more digital sockets, or if your DVD player or other digital audio product only has standard Optical / Toslink digital connectors, this is a great way to upgrade by adding coaxial inputs and outputs. The BT992 lets you interface modern digital audio products such as MiniDisc, DVD, CD, DAB radio, etc. It also acts as a booster or repeater where long lengths of cable are used. Converts both ways between Optical and Digital S/PDIF signals.
It is simple to use and housed in the attractive silver B-Tech steel casing.
Bi-directional Digital Signal Converter • Optical to Digital Co-Axial S/PDIF • Digital Co-Axial S/PDIF to Optical • Power Supply Included.
Price: £21.95 £25.79 Including VAT at 17.5% |
| |
|
2-WAY STEREO SPEAKER SWITCH
| Designed to switch 2 pairs of stereo loudspeakers. Loudspeakers connected in series when in "1 + 2" mode. Ideal for kitchen or"Auxiliary" loudspeakers.
Listen to either pair of loudspeakers separately or together • Simple strong connection by scew terminals • Accepts loudspeaker cable up to 2.5mm (79/0.2mm) diameter • Suitable for loudspeakers from 4 ohms to 16 ohms • 150 watts RMS per channel rating • Strong, stylish metal console.
Price: £11.06 £13.00 Including VAT at 17.5% |
| |
|
4-WAY STEREO SPEAKER SWITCH
| Enables four pairs of speakers to be connected to the stereo output of an amplifier. Each speaker set can be individually activated via the push buttons on the front of the box. Ideal for home or office installation were sound is required in different rooms.
Heavy-duty push-buttons with individual On/Off indicators • Clip terminals • Black plastic housing • Input 1 x stereo • Output 4 x stereo • Power per channel 100W max. • Dimensions 178 x 110 x 50mm
Price: £16.15 £18.98 Including VAT at 17.5% |
| |
|
6-WAY STEREO SPEAKER SWITCH
| Enables six pairs of speakers to be connected to the stereo output of an amplifier. Each speaker set can be individually activated via the push buttons on the front of the box. Ideally suited for buildings where an independent sound control is required for different rooms or zones.
Heavy-duty push-buttons with individual On/Off indicators • Built-in overload protection • Clip terminals • Black plastic housing • Supplied with 80 room indicator labels • Input 1 x stereo • Output 6 x stereo • Power per channel 100W max. • Frequency response 20Hz - 20kHz • Dimensions 300 x 170 x 53mm
Price: £29.74 £34.94 Including VAT at 17.5% |
| |
|
10-WAY MONO SPEAKER SWITCH
| Intended for PA or other monaural applications, this switch box provides individual on/off control of up to ten speaker systems. Power capacity is 100W RMS, internal progressive resistor network keeps amplifier load to a minimum of 2ohm, when ten 8ohm systems are selected. Rear speaker in/out connections are color coded push connectors. Metal case has non-skid rubber feet and stays securely in place.
Price: £21.23 £24.95 Including VAT at 17.5% |
| |
|
IN-WALL SPEAKER VOLUME CONTROL
| This high quality in-wall volume control is easy to install and you can conveniently locate it anywhere for locally controlling remote-sited speakers. Suitable for all standard 2-gang electrical boxes that are 47mm deep.
Transformer design for maximum efficiency • 60 Watts RMS per channel • Accepts speaker cable up to 2.5mm in diameter • Suitable for speakers rated at 4, 6 or 8 ohms • Frequency response 20-20,000Hz
Price: £28.89 £33.95 Including VAT at 17.5% |
| |
|
SPEAKER WALL OUTLET
| Electrical type wall plates with 4mm banana type terminals for loudspeaker connections. The connection plates allow the connection and installation of cabinet speakers without unsightly, trailing wires, especially surround systems. The connectors are colour coded, and the plates fit standard 1 gang mains back boxes. Available in Single and Twin speaker versions.
Price: £2.51 £2.95 Including VAT at 17.5% |
Please select
|
|
100V 12 WATT SPEAKER VOLUME CONTROL
| A high quality attenuator supplied complete with plastic surface mount back box. The stylish ABS faceplate is fitted with a matching plastic knob. Each attenuator is pre-fitted with a relay for optional use. Not suitable for use with low impedance home speakers.
Attenuation in 10 steps: 8 x 3db and 2 x 6dB steps • Frequency response 35Hz - 20kHz • Relay: 24V, 50mA
Price: (1 to 4) £14.89 £17.50 Including VAT at 17.5%
Price: (5 to 9) £16.92 £19.88 Including VAT at 17.5%
Price: (10+) £15.60 £18.33 Including VAT at 17.5% |
| |
|
100V 24 WATT SPEAKER VOLUME CONTROL
As above but handling up to 24 Watts of power.
Price: (1 to 4) £15.32 £18.00 Including VAT at 17.5%
Price: (5 to 9) £16.92 £19.88 Including VAT at 17.5%
Price: (10+) £15.60 £18.33 Including VAT at 17.5%
|
| |
|
100V 36 WATT SPEAKER VOLUME CONTROL
As above but handling up to 36 Watts of power.
Price: (1 to 4) £17.02 £20.00 Including VAT at 17.5%
Price: (5 to 9) £16.92 £19.88 Including VAT at 17.5%
Price: (10+) £15.60 £18.33 Including VAT at 17.5%
|
| |
|
100V 50 WATT SPEAKER VOLUME CONTROL
As above but handling up to 50 Watts of power.
Price: (1 to 4) £19.15 £22.50 Including VAT at 17.5%
Price: (5 to 9) £16.92 £19.88 Including VAT at 17.5%
Price: (10+) £15.60 £18.33 Including VAT at 17.5%
|
| |
|
AUDIO AND VIDEO LEADS, CABLES AND ADAPTERS |
